You are here

Ultimate Oscillator (ULT)

Printer-friendly versionPDF version

This is another indicator introduced by Mr. Larry Williams. It seems to be another modification of the RSI indicator, as is his %R indicator. If you lay the three indicators on your chart, you'll see many similarities. The advantage of the ULT indicator is that the trader is given two additional variables in the formula to modify and finetune the action and reaction to the market price.

This indicator, as with the RSI indicator, works on an overbought and oversold region. Mr. Williams states that the upper threshold should start at 70% and the lower threshold at 30%, but depending on the market, the volatility, and the settings, you may need to adjust the thresholds to either higher or lower settings to obtain signals.

Once the ULT line crosses above the upper threshold into the overbought region, it is time to anticipate a reversal in price and lower prices to ensue. When the ULT line crosses below the lower threshold, it is time to anticipate a reversal in price and anticipate prices to rise once again. Many traders like to use a 50% line to reconfirm price action. Crossing the 50% line is a confirmation of the overall trend.

Calculation

The True Low (TL) is the lower of today's low or yesterday's close. Calculate today's Buying Pressure (BP) like this:

BP = Today's close - Today's TL

Calculate today's True Range (TR) by finding the largest outcome of one of the following equations:

TR = Today's High - Today's Low
Today's High - Yesterday's Close
Today's Close - Today's Low

Calculate BPSum1, BPSum2, and BPSum3 by adding up all of the BPs for each of the three specified time frames. Calculate TRSum1, TRSum2, and TRSum3 the same way with the TR's.

The Raw Ultimate Oscillator (RawUO) is calculated here:

RawUO = 4 x (BPSum1 / TRSum1) + 2 x (BPSum2 / TRSum2) + (BPSum3 / TRSum3)

The Final Ultimate Oscillator is calculated here:

FUO = [ RawUO / (4 + 2 + 1) ] x 100

Buy/Sell Signals

A buy signal occurs when the ULT line crosses from below the lower threshold to above the lower threshold. A sell signal occurs when the ULT line crosses from above the upper threshold to below the upper threshold.

Preferences

Right-click on the ULT button in your Indicator toolbar and select ULT Settings. The Preferences Tab will open in the Control Panel and the ULT preferences will be displayed. (Once you click on the chart, the Preference tab will go back to chart settings.)

Restore Settings: TNT Default will change your settings back to the original software settings. My Default will change current settings to your personalized default settings. Apply To All Charts will apply your selected settings on all open charts. Save As My Default will save your current personal settings.

ULT Periods: Specify the number of days to be used in calculating the SRSI.

Line: Choose the color, line style, and line thickness of your line.

View up to four Thresholds at values and colors of your choice. When calculating buy/sell signals, Threshold 1 is used as the upper threshold and Threshold 2 is used as the lower threshold (default values set at 70 and 30).

Choose when you want Buy/Sell Arrows to show and what color.